Pressure Washing Cost in Edwardsville, IL: What Quotes Actually Run

Edwardsville Power Washing · 2026-08-15

One of the most common frustrations we hear echoes what shows up in home-improvement forums constantly: someone gets quotes on the same job and the numbers are "all over the map" -- a fence staining job that should be straightforward comes back anywhere from $1,000 to $2,500 depending on who's bidding.

Pressure washing pricing has the same problem. Here's what actually drives the number, and rough ranges based on typical residential jobs nationally, so you have a sense of scale before you request a quote.

What actually drives the price

• Square footage. A 1,400 sq ft driveway costs more to clean than a 600 sq ft walkway -- obvious, but it's the single biggest input.
• Surface condition. Years of built-up algae, oil stains, or rust take more time (and sometimes a pre-treatment chemical) than routine seasonal grime.
• Method required. Soft washing (siding, roofs) takes longer and uses different equipment than straight pressure washing (concrete, pavers), and usually costs more per square foot.
• Access. A driveway you can pull a truck right up to is cheaper to service than a backyard patio that needs hose runs through a gate.

Typical residential ranges

These are general ballpark figures for reference, not a quote for your property -- actual pricing depends on the specifics above:

• Driveway or walkway pressure washing: often priced per square foot for concrete or pavers, with larger jobs and heavier staining pushing toward the higher end of a given range.
• House soft washing: priced by square footage of siding, typically higher per-square-foot than driveway work because of the slower, lower-pressure method and taller equipment needs on two-story homes.
• Deck or fence cleaning: priced by square footage, similar to the range homeowners report for staining prep work -- cleaning is usually a smaller line item than the stain and labor that follows.
• Patio and outdoor living cleaning: comparable to driveway pricing per square foot, with stone and paver surfaces sometimes running slightly higher due to grout lines and joint sand.

What a real quote should include

A number worth trusting is tied to your actual surface type and square footage, not a flat "starting at" figure. That's why we confirm scope before anything is scheduled -- a rough description with photos is usually enough to get close, and we finalize before any work happens.